CX-Designer Questions

Does Omron's Cx-Designer Have a parameter (compared to allen bradley's?) Can I assign an HMI Button to display or assign parameters to one bit lamp?

I am trying to Make an IO Screen that Changes the Text List When a Button is pressed and have one Bit lamp for each of the 15 bits i.e. 0.00, 1.00, 2.00, 3.00, 4.00 goes all to the same bit lamp but assigned offset to change when the user presses an HMI button along with the text as well.

Hi Not Exactly as what you mentioned, but I have done that in another way.

Attached is the CX Programmer and CX Designer files.

1. Open the file & run the CX Programmer in simulator mode
2. Open the file & run the CX Designer in test mode, linking to simulator.
3. Open the PLC memory area and key in values in CIO fields
4. At the HMI test screen enter the channel number to monitor.

Regards

chavak said:

Hi Not Exactly as what you mentioned, but I have done that in another way.

Attached is the CX Programmer and CX Designer files.

1. Open the file & run the CX Programmer in simulator mode
2. Open the file & run the CX Designer in test mode, linking to simulator.
3. Open the PLC memory area and key in values in CIO fields
4. At the HMI test screen enter the channel number to monitor.

Regards

Click to expand...

Thanks I will give this a try this weekend I appreciate the program.