Red Lion Graphite series opinion

adisharr

Member
A
Join Date
Jan 2010
Location
Rochester, NY
Posts
236
I have a new project where I'm going to be using one of the new Graphic panels (9" version). I've used the 4" and 7" Kadets almost exclusively with no issues.

They're a bit more expensive than what I was expecting although they do seem to have a lot more capability than the Kadets.

Has anyone has any problems with the new series? Anything to watch out for?
 

Similar Topics

N
Red Lion Graphite G12-RS485 port loses connection to Red Lion Cub
I'm trying to use a Red Lion Cub counter (Cub5B00) as a counter and give the cub's counts to a Graphite G12 PLC/HMI to display. After about an...
Replies
1
Views
111
Ken Roach
Ken Roach
S
Red Lion Graphite HMI
Does anyone know a quick answer to the difference of a red lion G10C1000 vs G10C0000. In crimson it shows an aux ethernet port. on the web site i...
Replies
1
Views
1,453
sharkyh2o
S
E
Red Lion Graphite Analog Ouputs
Hello all. I am struggling with an analog output from a Red Lion Graphite HMI with a GMOUT4 module. I can watch what the data should be (currently...
Replies
2
Views
1,371
widelto
widelto
T
Red Lion PAX to Graphite HMI communication issue
I have a graphite HMI and 3 PAX panel meters. I have tried using RLC and Modbus Master drivers, 2 different cables, with and without Comm...
Replies
1
Views
1,875
Tkling
T
B
Red Lion Graphite - Tank Level to Volume Program
Hi Everyone, Got a new project where I am going to read the level of a tank via Modbus and I need to use the tank strapping chart to convert it to...
Replies
8
Views
2,524
OkiePC
OkiePC
Back
Top Bottom