Red Lion Graphite HMI
- Thread starter sharkyh2o
- Start date
All i can see is only one ethernet port.
10 inch VGA Color standard touchscreen (640 x 480)
Indoor Model
Up to 20 Simultaneous Protocol Conversions
One 10/100 Base-TX Ethernet Port
Three Fully Isolated Serial Communication Ports, (two RS-232 and one RS-422/485)
One USB Type B Port
Two High-retention USB Host Ports
7 Module Slots to Easily add I/O Capability with Plug-in Modules
275 x 218 mm Dimensions
OPC UA Client Driver
OPC UA Historical Access
Built-in MQTT connectors accelerate IIoT projects with point-and-click simplicity
Google Cloud
Amazon AWS
Microsoft Azure
Sparkplug
Inductive Automation Ignition!
Ubidots
Store and Forward Buffering for Cloud Connectors
10 inch VGA Color standard touchscreen (640 x 480)
Indoor Model
Up to 20 Simultaneous Protocol Conversions
One 10/100 Base-TX Ethernet Port
Three Fully Isolated Serial Communication Ports, (two RS-232 and one RS-422/485)
One USB Type B Port
Two High-retention USB Host Ports
7 Module Slots to Easily add I/O Capability with Plug-in Modules
275 x 218 mm Dimensions
OPC UA Client Driver
OPC UA Historical Access
Built-in MQTT connectors accelerate IIoT projects with point-and-click simplicity
Google Cloud
Amazon AWS
Microsoft Azure
Sparkplug
Inductive Automation Ignition!
Ubidots
Store and Forward Buffering for Cloud Connectors
Similar Topics
I'm trying to use a Red Lion Cub counter (Cub5B00) as a counter and give the cub's counts to a Graphite G12 PLC/HMI to display. After about an...
Hello all. I am struggling with an analog output from a Red Lion Graphite HMI with a GMOUT4 module. I can watch what the data should be (currently...
I have a graphite HMI and 3 PAX panel meters.
I have tried using RLC and Modbus Master drivers, 2 different cables, with and without Comm...
Hi Everyone,
Got a new project where I am going to read the level of a tank via Modbus and I need to use the tank strapping chart to convert it to...
Hey folks, I have a Graphite display that had water dripping inside. The display powers on to the initial graphite start up screen and then...