Totalizing Analog flow in Contrologix.

bobwithdana

Member
B
Join Date
Dec 2003
Location
california
Posts
239
Can someone tell me if this math function is correct to totalize analog flow in a 30 Milsec peridoc task?

FT_TC08_01.SCALED/2000+XC_TC08_10.FLOW_TOTAL

If true what is the relationship between 30 Milsec and /2000?

Thanks so much?
 
Hello,

I am confused. What is the input flow rate time base? per second? minute? hour?
 
Hello,

I would assume the flow rate is per minute.

60 / 2000 = 0.03 = 30 mills

I could be wrong.
 

Similar Topics

danw
Totalizing flow rate: analog vs pulse - a comparison
Given the variety of opinions about the wisdom and feasability of totalizing an analog flow signal I ran a test by totalizing both the analog flow...
Replies
0
Views
3,424
danw
danw
R
Totalizing rate from analog input
Hello, I am using an A-B micro830 PLC and analog input plug-in with Connected Components Workbench 3. I have a flow meter sending a 0-5V analog...
Replies
3
Views
3,423
Bit_Bucket_07
Bit_Bucket_07
A
Totalizing an analog signal
I have a Mitsubishi Q Series PLC and a E-terminal. I have an analog from a magometer 4-20ma going into my plc. I just need the PLC to read the...
Replies
5
Views
2,587
Von
V
H2OTom
Totalizing bulk delivery
Hello everyone! I've got something I'm trying to figure out and I'm possibly overthinking it. I've got a 25,000 gallon bulk chemical tank with an...
Replies
12
Views
2,179
danw
danw
I
Totalizing Tank by Volume
Hello, all. I’ve worked with totalizers based on a flow meter. However, I am trying to use ladder logic on totalizing a tank based on volume. I...
Replies
1
Views
1,134
Saffa
S
Back
Top Bottom