Wiring brainfart on Mitsubishi Fx1

Hey! I have a transistor output FX1 14MT and I can't figure out how to wire it.
(One of these http://back.es-electro.ru/res/production/files/fx1s_m_e.pdf)
I have +V0, +V1, +V2 and the standard Y0-6
Now I haven't done any wiring since I finished school and I simply can't figure out how to wire it.
All I want to do is connect a lamp to Y0.

Thanks for helping me clear up this brainfart!
F

Connect + terminal of power supply to +V0, Y0 to lamp, and other terminal of lamp to - terminal of power supply.

check page 2-4 and 6-5 of the manual.

Purrdie said:

Connect + terminal of power supply to +V0, Y0 to lamp, and other terminal of lamp to - terminal of power supply.

check page 2-4 and 6-5 of the manual.

Click to expand...

Hm. It works but I still have a slight problem. Is it not possible to power my lamp with the same 24v supply as I use for the PLC? Because that's what I did first and it just resulted in the plc rebooting.

Thanks for your help!