Jthornton Question

PERSPOLIS said:
HI

CAN YOU EXPLAIN THESE TERMINOLOY :
Cylinder Idle S1 S2 S3
Minor In Out In Out
Major Out In Out Out

MANY THANKS

There are two air cylinders the Minor Flap Cylinder and the Major Flap Cylinder. Each has two states In (retracted) or Out (extended)
When both cylinders are in state 0 (idle) or State 1, or State 2 or State 3 their positions are as in the grid above.
 

Similar Topics

Hello again..trying something on an existing poorly written program and just wanted to double check something system is an A-B MicroLogix 1200 In...
Replies
5
Views
169
Good morning! Let me start by saying, I am still learning about this type of HMI programming. I recently watched a video about recipes and how it...
Replies
0
Views
71
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...
Replies
2
Views
93
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
88
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
82
Back
Top Bottom