sinamics cu250s 2 pn

mick1985

Member
M
Join Date
Feb 2014
Location
Barnsley
Posts
5
Can anyone tell me how to read the status of control unit inputs in step 7. I am using a standard telegram 20. The communication is working fine.....i can start and stop the drive etc i just nee to read the status of the on-board control unit inputs

Thanks
 

Similar Topics

K
sinamics control unit cu250s
hello friends i have siemens sinamics G120 drive when i start the motor from push button from off position the faults A7994 IS appeared every...
Replies
1
Views
2,043
L D[AR2P#0.0]
L
H
siemens sinamics control unit CU250S-2-USS
Dear Team, I need to increase the maximum speed of my drive upto 60 HZ. and sadly im stuck with some parameter. Below parameters are already...
Replies
5
Views
3,296
Hasitha
H
D
Beckhoff => Siemens Sinamics V90 configuration example
Hello sameone have Beckhoff PLC Siemens Sinamics V90 configuration example?
Replies
0
Views
125
deividasn
D
M
Siemens Sinamics G120C fixed speed setpoint
Hello, I use a Siemens Sinamics G120C inverter in combination with a S7-1200 cpu. I use the Main Setpoint with the Providrive option and send...
Replies
8
Views
795
mulderm
M
P
Sinamics S120 migration to TIA
Hello to all, I have a STEP 7 project (v5.6) with S7-400F CPU and Sinamics S120 drives with CU320x2PN (ord. nr. 6SL3 040-1MA01-0Axx). I need to...
Replies
7
Views
978
Pandiani
P
Back
Top Bottom