Hitachi EH-RMP as Profibus-dp master

Hi there,

I want to use EH-RMP module as master on Profibus-DP to control slaves from PHOENIX CONTACT.
As recommended, I tried the sycon-dp configurator software from HILSCHER to build the network, but it seemed that sycon-dp didn't recognize the Hita_1004.gsd of EH-RMP to be as master.

Tip: CPU is EHV-CPU128

Is there any other configurator software that meets our need?

Hint:
EH-RMP is a master profibus-dp from HITACHI.

I have add the following rows to the gsd file of the master:

Adressing_Size_Inp = 256 ; Maximum input data length (bytes)
Adressing_Size_Outp = 256 ; Maximum output data length (bytes)

Is that right editing for gsd?

Please advise

This thread is just to move my post to top