Messages DH485

VJTX

Member
V
Join Date
Oct 2007
Location
TEXAS
Posts
126
I can't find much info on sending multiple messages from a micrologix 1400 on Node 7 to Nodes 1,2,3,8. Attached is my logic, will it work?
 

Similar Topics

S
Codesys not handling implicit messages
I am trying to get Codesys to work with a couple of Moxa ioLogik E1200 series DIO devices (E1210 and E1211). I am able to write to the E1211 DOs...
Replies
2
Views
169
schnepper
S
P
1734-rs232 ascii reading too long barcode messages
Hi to everybody. I need to read the first 12 characters of the message that a barcode reader sends to the ascii card (1734-rs232 ascii) and I...
Replies
8
Views
725
drbitboy
drbitboy
mad4x4
Siemens Ethernet Messages to from LIDAR
Can I open a Port from a Siemens PLC to an ethernet device Device will be at 192.168.0.1 and I need to open port 2112 (Upd?) Then once the...
Replies
0
Views
311
mad4x4
mad4x4
mad4x4
Siemens Ethernet Messages to/from LIDAR
Can I open a Port from a Siemens PLC to an ethernet device Device will be at 192.168.0.1 and I need to open port 2112 (Upd?) Then once the...
Replies
1
Views
372
drbitboy
drbitboy
F
FT View SE Local Station - Alarm Messages show up in summary but not log
Migrating v8 FT View SE to v13, had to export tags because after v10 the configuration is no longer supported. Imported tags to new Tag Alarm...
Replies
1
Views
511
FordTruckMan
F
Back
Top Bottom