LOGO 230RCE Power supply
- Thread starter jk102570
- Start date
jairus
Member
Logo 230RCE (6ed1052-1fb00-0ba7). i used this in my last project in water treatment small R.O., i wired directly with it the 220V AC power supply and it works. according to the manual: 230RCE the inputs will operate from 85 to 265V AC and 100 to 253V DC. With a maximum of 16 Ampers for the output contact can hold.
Similar Topics
Hello Team, I am desperate for some help with an assessment I have as part of a Level 3 general engineering course. I am in a role that is much...
Hi all,
First, thank you for reading the thread. So I had a task as the following:
An up-counter must be programmed as part of a batch-counting...
Hi Lads,
I want to implement a flood prevention system with my domestic water pump.
The intention is to have the water pump cut off on a daily...
[Update: fixed a typo in the image.]
See the image below, especially the blue-ish annotations.
The three rungs ending in output coils -( ) are...
We need a Really Simple and Cheap controller that has a display or a Web Interface where we can change some set points.
We were thinking about a...