drbitboy Lifetime Supporting Member OP Join Date Dec 2019 Location Rochester, NY Posts 8,088 Dec 8, 2023 #16 Here is that link about LOGO!'s order of operation: https://support.industry.siemens.com/forum/WW/en/posts/how-is-logo-executing-a-program/50926
Here is that link about LOGO!'s order of operation: https://support.industry.siemens.com/forum/WW/en/posts/how-is-logo-executing-a-program/50926
L D[AR2P#0.0] Lifetime Supporting Member L Join Date Nov 2006 Location UK Posts 6,694 Dec 8, 2023 #17 drbitboy said: I don't know if it's documented as such, but if the Dir(ection) pin is not connected to anything it essentially has a virtual "pulldown resistor," so it "reads" a 0 for the Dir input and counts up only. Click to expand... Ok, post#1 said it counted down by default
drbitboy said: I don't know if it's documented as such, but if the Dir(ection) pin is not connected to anything it essentially has a virtual "pulldown resistor," so it "reads" a 0 for the Dir input and counts up only. Click to expand... Ok, post#1 said it counted down by default
drbitboy Lifetime Supporting Member OP Join Date Dec 2019 Location Rochester, NY Posts 8,088 Dec 8, 2023 #18 L D[AR2 said: Ok, post#1 said it counted down by default Click to expand... oof, my bad. good catch.