DanteLuciano
Member
Hello guys, how are you?
I´m trying to conect a PowerFlex drive 753 with a 1203-SSS cable, but I get some errors with RSlinx Classic. I add a image showing the errors.
I put the following parameters in the configuration dialog box:
Comm Port: Comm port on your PC
Device: 1770-KF2/1785-KE/SCANport
Baud Rate: Baud Rate of the Adapter
Station Number: 00
Parity: None
Error Checking: BCC
Stop Bits: 1
Protocol: Full Duplex
Comm Port: Comm port on your PC
Device: 1770-KF2/1785-KE/SCANport
Baud Rate: Baud Rate of the Adapter
Station Number: 00
Parity: None
Error Checking: BCC
Stop Bits: 1
Protocol: Full Duplex
But the RSlinx say a error "rslinx device not recognized", and the CCW can´t conect with the device, just not appears in the options.
Can you help me?
I´m trying to conect a PowerFlex drive 753 with a 1203-SSS cable, but I get some errors with RSlinx Classic. I add a image showing the errors.
I put the following parameters in the configuration dialog box:
Comm Port: Comm port on your PC
Device: 1770-KF2/1785-KE/SCANport
Baud Rate: Baud Rate of the Adapter
Station Number: 00
Parity: None
Error Checking: BCC
Stop Bits: 1
Protocol: Full Duplex
Comm Port: Comm port on your PC
Device: 1770-KF2/1785-KE/SCANport
Baud Rate: Baud Rate of the Adapter
Station Number: 00
Parity: None
Error Checking: BCC
Stop Bits: 1
Protocol: Full Duplex
But the RSlinx say a error "rslinx device not recognized", and the CCW can´t conect with the device, just not appears in the options.
Can you help me?