Com Problm between OMRON CJ1G & EMS RFID

hygoonia

Member
H
Join Date
Feb 2015
Location
Johor
Posts
8
Hi all,

I have attached my code.

I connect with PC via Peripheral, Unit 0 node 1 (192.168.55.1 )connect with DiGi Connectport TS W Hub(192.168.52.2) with 4 ports, First port( port number 2101) connect to the EMS RF Device.

Current problem: Port open Okay, but problem in sending command and receive as well.

Please help!! Thanks everyone~~


I apologies for my bad language...
 

Similar Topics

K
RS485 Modbus RTU using PC com port in Twincat 3 issues
I'm trying to control a device via MODBUS RTU and the ModbusRtuMasterV2_PcCOM in Twincat 3. I've configured a device with the right com port and...
Replies
7
Views
221
Jkoso
J
C
Communication ek1100 (BACKHOFF) Com CLP Ethernet.
I'm retrofitting equipment, but I didn't want to change the electrical characteristics of the panel. In this equipment I have a dedicated...
Replies
0
Views
68
CapaceteJR
C
S
Modicom BM85 Memory after Power Loss
Hi folks ! Got an older Modicom BM85 and I suspect that it's not passing data to ModBus+ network. We had a power loss for a few days and I suspect...
Replies
0
Views
68
Soundwave1974
S
AutomationTechBrian
New PC with Serial Com Port for Communicating with SLC 5/03.
I need to recommend a PC to replace a customer's old Windows 7 computer. The only thing I need to think through is the serial com port to...
2
Replies
21
Views
688
AutomationTechBrian
AutomationTechBrian
C
ICOM PLC-2 Assistance Needed
We're upgrading an old PLC-2 system programmed in ICOM. We have the files, the PLC logic is in a .LAD format. Does anyone have working...
Replies
4
Views
422
L33er
L33er
Back
Top Bottom