et200s and sfc13

seee

Member
S
Join Date
Dec 2010
Location
singapor
Posts
112
hello dear experts.
Is it possible to use sfc13 to know that exactly which card(electronic module) on et200s is faulty in event of the bf led blinking? if yes,please let me know an example program.
thanks.
 

Similar Topics

K
Siemens ET200S IM-151-8 PN/DP CPU to Rockwell Allen Bradley L73 Communication
I was trying to communicate between Siemens ET200S IM-151-8 PN/DP CPU to Rockwell Allen Bradley L73 through Hilscher Gateway NT100-RE-EN. Using...
Replies
0
Views
140
kingsman8385
K
C
ET200S 4F-DO config problem
Hi all It’s been a while since I did any safety config with an S7-300 PLC and I think I must be missing something , I’ve added a 4F-DO output...
Replies
7
Views
3,850
RVaughan
RVaughan
P
ET200S Profinet GSD file
PLC in the project that I am currently working on has following GSD file but I cant find it anywhere online. My PLC is ET200S and its CPU is...
Replies
7
Views
2,122
AlfredoQuintero
A
R
WinCC 7.5 ET200S SCADA Communications
Got a new project using WinCC SCADA (V7.5 SP2) - the PLC is an ET200-SP, I've never had to communicate with one of these before (done plenty of...
Replies
3
Views
2,465
rtgibson
R
A
s7-300 plc with et200s modules
i m working on an old machine that has a layout of 1 cpu 6es7 315-6tg10-0ab0 (bus adresss 2) 1 et200s 6es7 151-1aa04-0abo (bus adress 4) 1 et200s...
Replies
7
Views
3,223
JesperMP
JesperMP
Back
Top Bottom