Floboss 103 changing gas composition

I have a Modicon M340 plc/ Magelis HMI and a Floboss that I'm wondering if there is a communication protocol to be able to change the gas composition through my HMI as we are switching between two systems. Not sure if this is possible but any information would be helpful. Thanks

the magelis HMIs I've dealt with were too basic it would be a pain in the ***. but new touch screen HMIs make it much easier. the FB 103 supports rs232 and rs485. Iy haven't personally.set this up.but I know it is possible and has be done successfully.

DwSoFt said:

the magelis HMIs I've dealt with were too basic it would be a pain in the ***. but new touch screen HMIs make it much easier. the FB 103 supports rs232 and rs485. Iy haven't personally.set this up.but I know it is possible and has be done successfully.

Click to expand...

I don't know about the Magelis, but the Red Lion people now have the ROC natively talking to their displays (TLP's). Maybe worth a shot to see if it can be done in an easier fashion. Ask your local distributor for a try before you for buy with a G306 or Kadet model?