Mistubishi E200 HMI Cable

onkalolo

Member
O
Join Date
Jun 2015
Location
UK
Posts
3
Hi,

Can I use a CAB30 cable for an older E200 series HMI? As well as an E1000 series?

(I expect I'd need a CAB5)

Thanks in advance!

edit: I think I've just discovered my initial thought was correct and I will need a CAB5, the pins are apparently slightly different! Would be helpful if someone could confirm this, though. Cheers
 
Last edited:

Similar Topics

JRoss
Mistubishi GT27 Scripting
I have to do some scripting in a Mitsubishi GT27 to read a CSV file off a USB stick and populate a series of registers in the PLC (FX5U). There...
Replies
4
Views
2,531
nehpets
nehpets
P
Mistubishi Data Register
Hello, Have a question that can hopefully have a simple answer. I want to track machine cycle counts to an HMI. Mitsubishi A series PLC and a...
Replies
12
Views
3,613
cjd1965
C
I
Mistubishi GOT 1020 HMI
Hi, Does anyone know an easy way to show and hide buttons. I know on the GT11+ series you can script or use the trigger, but on these there is...
Replies
0
Views
1,678
ianreeves
I
mjoubert
Mistubishi MR-J2S Servo Amp
Hi, Unit shows an E9 error (Supply Off) even though the supply is on. Has anyone else experienced this problem before? Should I be ordering a...
Replies
3
Views
3,579
mjoubert
mjoubert
B
Need Mistubishi Software
Does anyone know where I can locate software and a manual for an older Mitsubishi FX2-32MT plc? I am new in the PLC world and am currently...
Replies
4
Views
1,852
cantinho
C
Back
Top Bottom