1783-NATR problems..

mxm_88

Member
M
Join Date
Apr 2014
Location
Perm
Posts
31
Hi,

I have a problem with a NAT-device: 1783-NATR. A have a PLC L18ER (192.168.1.200), NATR and my note (10.63.3.2). I want to connect my PC to PLC via NATR. I configured NAT-rules and ports but the device is in fault (flashing red). Any ideas?

Screen.jpg
 
Last edited:
PLC: 192.168.200
PC: 10.63.3.2
NATR: Public - 10.63.3.1 Private - 192.168.1.1 NAT Rules - 10.63.3.2 -> 192.168.1.200
 
My configuration from SD in .txt. Originally it's .xml, I can upload only .txt.
 
Last edited:

Similar Topics

C
Rockwell Historian/OPC data tracking through 1783-NATR
Is it possible to gather OPC data through a 1783-NATR? Searching around, it sounds like OPC data might be blocked by any NAT... Is there any work...
Replies
2
Views
261
CageFreeBMW
C
C
1783-NATR Configuration File Generation
Good morning all, I have a project that has quite a few NATRs to configure. I would like to modify the generated backup config file because I...
Replies
2
Views
459
cdewitt
C
M
CompactLogix Cooms Through 1783-NATR
I am trying to communicating with other PLCs on a public network from a CompactLogix PLC on a private network. I have installed at 1783-NATR...
Replies
1
Views
572
IO_Rack
IO_Rack
S
1783-NATR Linx Quirk
Hello, I'm seeing some interesting behavior with my NATR connections on FTLinx. 2 separate cases are showing the same problem: The first NATR...
Replies
0
Views
633
samg
S
S
1783-NATR Private Network
Hello, I have been trying to set up a NATR with 3 connections, I am able to ping the public IP of the NATR itself off of my network, but nothing...
Replies
3
Views
698
DarrylR
D
Back
Top Bottom