Hello Everyone,
I am facing a peculiar problem with intouch...The problem is PLC Fault alarm comes and communication losts between intouch and S7-400 PLC....Only thing we do is just close the intouch application and open it...I found that plc_alarm is the item which is causing the alarm...I am completely new to intouch and I have basic programming concepts..
In the application script i found the following code:
sample_time_count =sample_time_count - 1;
time_count = time_count + 1;
IF time_count > 25 THEN
PLC_alarm = 1;
ELSE
PLC_alarm = 0;
ENDIF;
imp_min = DB_BR_GrL1_imp_min_br;
IF $AccessLevel < 9999 THEN
EnableDisableKeys(1,1,1) ;
ELSE
EnableDisableKeys(0,0,0);
ENDIF;
I want the significance of "time_count > 25"? what is 25?
Thanks in advance.
I am facing a peculiar problem with intouch...The problem is PLC Fault alarm comes and communication losts between intouch and S7-400 PLC....Only thing we do is just close the intouch application and open it...I found that plc_alarm is the item which is causing the alarm...I am completely new to intouch and I have basic programming concepts..
In the application script i found the following code:
sample_time_count =sample_time_count - 1;
time_count = time_count + 1;
IF time_count > 25 THEN
PLC_alarm = 1;
ELSE
PLC_alarm = 0;
ENDIF;
imp_min = DB_BR_GrL1_imp_min_br;
IF $AccessLevel < 9999 THEN
EnableDisableKeys(1,1,1) ;
ELSE
EnableDisableKeys(0,0,0);
ENDIF;
I want the significance of "time_count > 25"? what is 25?
Thanks in advance.