Technical information of CPU S7-315 2PN/DP

tai-tt

Member
Join Date
May 2010
Location
dn
Posts
2
Iam fining the Technical information of CPU S7-315 2PN/DP following:

(1) Average fault time
(2) Annual system utility
(3) Acknowledge time of calling real-time date picture
(4) Acknowledge time of calling historic data pool
(5) Transmission of telemetry over blind spot
(6) Transmission of teleindication deflection
(7) Record resolution of SOE
(8) Display generation time from fault occurred
(9) Transmission time of remote control order
(10) Warning accuracy of system
(11) Control accuracy of local equipment
(12) Target analysis and calculation accuracy
(13) Transmission time of teleindication deflection
(14) Transmission time of important remote measurement
(15) Transmission time of secondary measurement
(16) Transmission time of normal remote measurement
(17) Transmission of total electrical degree
(18) Transmission time of all teleindication

Please help me, thanks for your support!
 

Similar Topics

Hello, I am a plc engineer and I have a job to do in the NIGERIA 25000 TON GRAIN SILOS STORAGE CONTROL PANEL. A problem where the panel is not...
Replies
1
Views
46
Work instruction. Hey seasoned vets, I have to make some work instruction for a couple things and I’m just out of school I was wondering if...
Replies
9
Views
1,015
Hi Guy, some times i receive this message in my PV1000: 637 Communication Driver has FAULTED -contact technical support. after there is no...
Replies
11
Views
3,933
Below are the few details for your reference: B&R PLC Module 2005 CPU – CP152 with APM (Application Memory) Module ME Power Supply – PS477...
Replies
0
Views
1,574
An automation system having a dedicated PLC connected to feedback potentiometer supplied via 0-10V, an added automated system based on another PLC...
Replies
18
Views
4,290
Back
Top Bottom