Hello,
I wanna communicate between 2 1500 CPU's.
I tried the old fashion way.
Made a project with 2 1500 CPU's.
Both CPU's enabled the Put & Get:
Connected both with ID 100:
PUT and GET functions only in PLC_1:
SEND and RECEIVE PLC_1:
SEND and RECEIVE PLC_2:
So here I'm not receiving the data that is PUT from PLC_1...
What could be the cause ?
I do not have errors and status is alternating between 0 and 25 (processing). So verything seems normal, but doesn't work...
Any ideas ?
Thanks in advance,
Kind regards,
Gerry
I wanna communicate between 2 1500 CPU's.
I tried the old fashion way.
Made a project with 2 1500 CPU's.
Both CPU's enabled the Put & Get:
Connected both with ID 100:
PUT and GET functions only in PLC_1:
SEND and RECEIVE PLC_1:
SEND and RECEIVE PLC_2:
So here I'm not receiving the data that is PUT from PLC_1...
What could be the cause ?
I do not have errors and status is alternating between 0 and 25 (processing). So verything seems normal, but doesn't work...
Any ideas ?
Thanks in advance,
Kind regards,
Gerry