Kataeb
Member
Kindly, we have the following module with its Module Status led solid red.
What can we do to solve this?
" POINT I/O EtherNet/IP Adapter Module , 1734-AENT , Rockwell , series A revision 2 "
In the manuals it is mentioned the following probable cause.
If we download its firmware again will it help?
" Firmware fatal error present. [Unrecoverable fault has occurred: Self-test failure present (checksum failure, or RAMtest failure at cycle power).] "
What can we do to solve this?
" POINT I/O EtherNet/IP Adapter Module , 1734-AENT , Rockwell , series A revision 2 "
In the manuals it is mentioned the following probable cause.
If we download its firmware again will it help?
" Firmware fatal error present. [Unrecoverable fault has occurred: Self-test failure present (checksum failure, or RAMtest failure at cycle power).] "