Lallers66
Member
Hi there.
I have a Micrologix 1100, I have 6 switches to I:0/0 through I:0/5.
My plan is to use I:0/0 to I:0/3 as set for a value of 0-15.
I:0/4 and I:0/5 for the values 0, 1/4, 1/2 and 3/4
This will be combined later for a total range of 0-15.75 gallons.
I have tried COP function to move the first 4 values into a N7 and then use the FRD function.
But I can't get it on how to use only the first 4 and the other 2 separate from each other.
I:0/6 through I:0/9 will be used for other.
I will use this value of volume, use a flowmeter to fill this predetermined volume in a vessel.
Any help is appreciated.
I have a Micrologix 1100, I have 6 switches to I:0/0 through I:0/5.
My plan is to use I:0/0 to I:0/3 as set for a value of 0-15.
I:0/4 and I:0/5 for the values 0, 1/4, 1/2 and 3/4
This will be combined later for a total range of 0-15.75 gallons.
I have tried COP function to move the first 4 values into a N7 and then use the FRD function.
But I can't get it on how to use only the first 4 and the other 2 separate from each other.
I:0/6 through I:0/9 will be used for other.
I will use this value of volume, use a flowmeter to fill this predetermined volume in a vessel.
Any help is appreciated.