BCD conversion

panic mode said:
bigrthanur,

can you please provide more detail? for example what is the plc? it has been asked before but i have to agree: if the plc can do conversion (most do), why bother translating value in the fanuc controller?
Click to expand...

This is true just wanted to try a better way to transfer data into the robot. Currently using KEPware which has to run through the PV into the robot and vice versa. I am playing with an EWEB card now trying to see if this will give us the ability to eliminate the KEPware. and continually SPAM the robots. Currently with KEPware a macro has to be run to transfer data.
 

Similar Topics

J
BCD Conversion error in s7 300 cpu 313C
hi... i have an issue in s7 300 plc, while we run the machine(in idle there is no fault) , plc cpu goes in SF mode, after restart the power cycle...
Replies
2
Views
117
L D[AR2P#0.0]
L
M
8 digit BCD to 4 digit BCD conversion
Hi. I’m doing a PV 1400e to PVP 7 migration and I don’t know how to convert the old 8digit BCD type from PB1400e into something that will work on...
Replies
2
Views
593
Mikemator
M
L
BCD conversion
Hi there. I have a Micrologix 1100, I have 6 switches to I:0/0 through I:0/5. My plan is to use I:0/0 to I:0/3 as set for a value of 0-15. I:0/4...
Replies
3
Views
1,748
Lallers66
L
D
BCD to Integer conversion
Hi all, I am quite new to PLC programming, so pardon my noob-ness. First, I have counters & timers in my program that I use to calculate total...
Replies
2
Views
3,546
Homer_BL
H
A
BCD conversion error
Hi, I recently added a BCD to int conversion block to compare 2 MW. The CPU has a SF error.In the diagnostic area it shows BCD conversion error. I...
Replies
1
Views
5,010
L D[AR2P#0.0]
L
Back
Top Bottom