Hi There,
Can some one tell me how to access the processor error status in controllogix controller.
I have used GSV instruction
as follows
===============================
class name: FaultLog
attribute name: majorFaultBits
Destination: mydestination [DINT]
=================================
class name: ControllerDevice
Attribute Name: Status
Destnation: Mystatusbits [INT]
Ihave placed both the instrucitons (GSV) under controller faultHandler.
When i created a major fault, none of the destination tags contained any value.
OR
Since the controller may not execute any ladder,Is it possible to access those data from other PLCs for example using "CIP Generic message?
Thanks in advance.
Siv
Can some one tell me how to access the processor error status in controllogix controller.
I have used GSV instruction
as follows
===============================
class name: FaultLog
attribute name: majorFaultBits
Destination: mydestination [DINT]
=================================
class name: ControllerDevice
Attribute Name: Status
Destnation: Mystatusbits [INT]
Ihave placed both the instrucitons (GSV) under controller faultHandler.
When i created a major fault, none of the destination tags contained any value.
OR
Since the controller may not execute any ladder,Is it possible to access those data from other PLCs for example using "CIP Generic message?
Thanks in advance.
Siv
Last edited: