Hello.
I am developing an add-on program for a existing Omron CJ1G CPU. The system consists of 1 CPU and 4 Remote IOs. The main rack input start from 0.00 to 7.15 and the output from 8.00 to 15.15. There is no add-on to the main rack so up to now everything is OK.
With the remote IOs goes like this.
2000.00 to 2006.15, 2008.00 to 2014.15, 2020.00 to 2021.15 and 2028.00 to 2029.15
Inputs are like :
from 2008.00 to 2014.15, 2028.00 to 2029.15
The others are outputs.
Now I am going to add 16 DI and 16 DO to one remote IO panel but the IO seems very mixed up to me because I mostly %99 program Siemens PLCs.The Omron IO mapping is very strange to me right now so I need your pros help please.
So what will be my input and output adresses. Do I need to do something like a hardware configuration for them or are they automaticly adressed. If I adress them myself do I have to check wheter these bits are used in the program or not?
And also one more question there are Omron HMIs used in the application where I have to make some changes. Can I upload program from them? The are NS models and NSJ models both.
Thanks...
I am developing an add-on program for a existing Omron CJ1G CPU. The system consists of 1 CPU and 4 Remote IOs. The main rack input start from 0.00 to 7.15 and the output from 8.00 to 15.15. There is no add-on to the main rack so up to now everything is OK.
With the remote IOs goes like this.
2000.00 to 2006.15, 2008.00 to 2014.15, 2020.00 to 2021.15 and 2028.00 to 2029.15
Inputs are like :
from 2008.00 to 2014.15, 2028.00 to 2029.15
The others are outputs.
Now I am going to add 16 DI and 16 DO to one remote IO panel but the IO seems very mixed up to me because I mostly %99 program Siemens PLCs.The Omron IO mapping is very strange to me right now so I need your pros help please.
So what will be my input and output adresses. Do I need to do something like a hardware configuration for them or are they automaticly adressed. If I adress them myself do I have to check wheter these bits are used in the program or not?
And also one more question there are Omron HMIs used in the application where I have to make some changes. Can I upload program from them? The are NS models and NSJ models both.
Thanks...