SoftwareJanitor
Member
Just downloaded an existing app to this Controller and I can see instrument inputs changing in the tag list when I go online, but the clock is not updating. The code uses a "GSV" Function Block to fetch "WallClockTime" and store it in a "DateTime" array. When I manually change one or more of the DateTime array values, I notice that a series of "MOV" Function Blocks, which move each part of the time into individual tags called "PLC_YEAR_NOW", etc. don't change ... meaning - the function blocks aren't executing.
I checked the "Properties" under this "MainTask" and it shows up as type "Continuous". Others have a green clock icon and are defined as "Periodic".
This *was* working, but someone here tried re-loading it, and when it 'failed during the download', he suddenly had to leave for the day because he was 'out of hours' (hourly) ... LOL!
Any ideas?
Also - I see 62 warnings during the download ... mostly "Warning: Rung XX AFI detected", but also a few "Shorted branch detected". Are these just typical minor issues that compilers like to spew out, but which can be ignored (for the most part)?
I checked the "Properties" under this "MainTask" and it shows up as type "Continuous". Others have a green clock icon and are defined as "Periodic".
This *was* working, but someone here tried re-loading it, and when it 'failed during the download', he suddenly had to leave for the day because he was 'out of hours' (hourly) ... LOL!
Any ideas?
Also - I see 62 warnings during the download ... mostly "Warning: Rung XX AFI detected", but also a few "Shorted branch detected". Are these just typical minor issues that compilers like to spew out, but which can be ignored (for the most part)?
Last edited: