Aggregateman
Member
Hi everyone! I have Panelview plus that is attached to a compactlogix controller, and I would like to use the built in alarms feature in view studio to place a pop up message on the HMI when someone hits any of the 6 different stop buttons along our feed line, I have it set up and it works, but the moment the stop button is released the alarm disappears, I want the alarm message to stay active until someone sees it. Is there a simple way to do this? Or do I need to make my own alarm system latching and unlatching tags.
It is set up to monitor a set of tags, IE, someone presses stop_1, it turns on a tag stop_alm_1 and stop_alm_1 is what the FTVIEW alarms manager is monitoring.
I can provide any more information needed, just ask.
Thanks! I appreciate the help!
It is set up to monitor a set of tags, IE, someone presses stop_1, it turns on a tag stop_alm_1 and stop_alm_1 is what the FTVIEW alarms manager is monitoring.
I can provide any more information needed, just ask.
Thanks! I appreciate the help!