DenisfromBalti
Member
Hi, im trying to go to the config mode on PanelView Plus 600 series A rev. B, but have no luck. Somebody downloaded his own application with no go to config screen button in it, so when it powers up application automatically runs, and u cant go to config screen.
Tried to establish communication via Ethernet, but dont know its ip address..
Tried to establish communication via RS-232 printer port using NC-13 cable, RSLinx doesnt see it or doesnt want to see it..
Tried to update firmware with a COMPACT FLASH UPDATE CARD, during the update process error appears "not enough space, please remove current applications"
Does anybody know how to solve it????!!!!
Tried to establish communication via Ethernet, but dont know its ip address..
Tried to establish communication via RS-232 printer port using NC-13 cable, RSLinx doesnt see it or doesnt want to see it..
Tried to update firmware with a COMPACT FLASH UPDATE CARD, during the update process error appears "not enough space, please remove current applications"
Does anybody know how to solve it????!!!!