View Single Post
Old February 14th, 2020, 10:49 AM   #1
Supporting Member
United States

Kipper is offline
Kipper's Avatar
Join Date: Sep 2014
Location: Belvidere IL
Posts: 18
Only want to move number to one location, how can I control only one.

We have a carrier repair area that will hold 5 carriers, each carrier had a RFID tag. When the carrier comes into the repair area the reader will read the tag and move the number to Carrier IN Repair(0), or (1) or (2) or (3) or (4).

I only want it to move the number to one of them not all of them with Zero in it if you look at my logic pic. How can I control so It only moves once and not to all the ones with zero in it.

clear as mug, something I just can't figure out.
Thanks Kipp
Attached Images
File Type: png Carrier repair cue.PNG (3.3 KB, 17 views)
File Type: png Carrier repair logic.PNG (36.0 KB, 18 views)
Kipp M Koenig
  Reply With Quote