FALKE
Member
Hi!
I have a problem with communicating atlas copco combox-e (ethernet) with an AB COMPACTLOGIX. An atlas copco manual says that this is possible but doesn't say how. It's based in the master-slave principle.
I've tried to do it by messaging but I couldn't do it.
I don't know If I'm missign more data to configure the message instruction, but all I have are just the IP address, and the name of the module.
I can see the combox-e in the RSLINX but how it doesn't have EDS file, it appears as a yellow cuestion mark.
The only data I can see, is with the message instruction configured as DEVICE WHO, and the data replied are the name that the RSLINX gives to the module "ETHERNET MODULE" as an string, but I couldn't get Pressure, Temp, etc, from the compressors and driers.
Does anybody has code or something to help me?
Thanks in advance.
I have a problem with communicating atlas copco combox-e (ethernet) with an AB COMPACTLOGIX. An atlas copco manual says that this is possible but doesn't say how. It's based in the master-slave principle.
I've tried to do it by messaging but I couldn't do it.
I don't know If I'm missign more data to configure the message instruction, but all I have are just the IP address, and the name of the module.
I can see the combox-e in the RSLINX but how it doesn't have EDS file, it appears as a yellow cuestion mark.
The only data I can see, is with the message instruction configured as DEVICE WHO, and the data replied are the name that the RSLINX gives to the module "ETHERNET MODULE" as an string, but I couldn't get Pressure, Temp, etc, from the compressors and driers.
Does anybody has code or something to help me?
Thanks in advance.
Last edited: