Hi,
We are trying to interface Allen Bradley Micrologix1100 with Modicon TSX Microscan through Modbus.
Micrologix is Master and Modicon is configured as slave PLC.
This connection is to Modicon's D+ And D- terminals.
All communication parameters are matched with both the PLCs.
But communication is not getting established.
We see blinking of the LED on Modicon communication card but no dat is received from Modicon.
Can anybody help to resovle the issue?
We are trying to interface Allen Bradley Micrologix1100 with Modicon TSX Microscan through Modbus.
Micrologix is Master and Modicon is configured as slave PLC.
This connection is to Modicon's D+ And D- terminals.
All communication parameters are matched with both the PLCs.
But communication is not getting established.
We see blinking of the LED on Modicon communication card but no dat is received from Modicon.
Can anybody help to resovle the issue?