Re-size PVComponent Application

Marc

Member
Marc
Join Date
Jun 2004
Location
Nashua, NH
Posts
430
Hi all,

I have a .CHA file that was written for a 6 Inch monochrome Panel View Component. I am trying to load it into a 4 Inch color PV Component screen and it looks fine, just gives an error on every re-boot.

Have any of you successfully done this? Can't seem to find a way to change the type of device the .CHA file is tied to.

THX!

Marc
 

Similar Topics

L
Change Size of Keypad in FactoryTalk View Version 13?
I have two identical machines running similar HMI projects, the only difference is one is done in FactoryTalk View Version 10 and the other is...
Replies
1
Views
42
SCADA_Joe
SCADA_Joe
D
Selecting fuse size for servo amplifier
Hi, I'm working on Mitsubishi MR-J5-70A amplifier, and need some advice on selecting fuse size. Main power is 1ph 240VAC, and in the manual, it...
Replies
1
Views
63
OkiePC
OkiePC
K
VBscript size limit in Wincc v7.5.2.3?
Hello, I have a quick question. I have been using scripts to change the color of buttons. The reason, I am usually using multiple hmiruntime.tags...
Replies
1
Views
101
Lare
L
Mas01
S7 TIA Portal: What size memory card do I need?
Supposing I want to be put a TIA Portal Project "executable image" onto a memory card (e.g. see picture). The reason for doing this is so that I...
Replies
8
Views
376
mk42
M
E
Wrong Display Size
Hi all, I am having an issue with FT View Studio ME when I try to open the propoerties of any object, the size of it is very big and doesn't let...
Replies
0
Views
104
estebangza97
E
Back
Top Bottom