PowerFlex 525 HIM via PanelView

val_99

Member
V
Join Date
Mar 2005
Posts
138
Hi all,
I would be interested in emulating PowerFlex 525 HIM interface via PanelView 6 or 7. Doing this I would eliminate need in having external HIM modules mounted on a panel door (to stay in line with recent OSHA requirements), so project price would go down significantly.
Just curious if anyone made it.
 
On the AB Site, go to software downloads, look for 525 faceplates. They are there for ME and SE. Sample code as well.
They work very well once you understand the AOI.
 

Similar Topics

N
powerflex 525 max frequency parameter via rslogix 5000
hello i am trying to set the max frequency for the drive via rslogix 5000, but do not see that patameter in the rslogix 5000 drive paramerts? the...
Replies
1
Views
340
ianingram
I
D
Powerflex 525 drive controlled via logix5573
Hello, I recently replaced a power flex 525 drive which has identical parameters and is controlled via a logix 5573 controller. I have run into a...
2
Replies
26
Views
6,668
Geospark
Geospark
B
PowerFlex 525- If Ethernet/IP is selected , but I want to control speed via.4-20 ma.
Good Morning , I have a PowerFlex 525 , that most controls are set for Ethernet/IP. I would like to control the speed with 4-20 ma. from a...
Replies
4
Views
3,451
Baker in Virginia
B
L
MicroLogix to Powerflex 525 via Ethernet
Hello All, I am using the on-board PID on a PowerFlex 525 to run a conveyor that will maintain a loop using a distance laser. The laser is hooked...
Replies
7
Views
8,656
Ken Roach
Ken Roach
W
Powerflex 525
Fairly new to the drive so apologise for the layman terms. Textile machine uses PF525 VFDs to control motors. The speed of the drive is currently...
Replies
5
Views
132
Wardy89
W
Back
Top Bottom