Hi everyone....
we are a production company and our machine is 10-12 years old. It was running from years, the cpu is SLC 5/04 (1747-L542) communicating with Panelview550.
Cpu goes into fault last night and stops the machine, we try to communicate with pc but RS linx didnt detect the CPU. At last we erase and then download the program backup with our laptop successfully but the Panelview diddnt communicate and displays the message
" No active nodes found on network "
The communication setting is same i.e. node, channel, baud rate etc..... cpu is working fine panel view was communicating fine before this incident and we are getting the same result as well as after swaping the processors. We didnt try to communicate PV with our laptop because we dont have software.
The node is 2 at pv and is communicating via DH485.
Any help would be highly appreciated....
Regards
we are a production company and our machine is 10-12 years old. It was running from years, the cpu is SLC 5/04 (1747-L542) communicating with Panelview550.
Cpu goes into fault last night and stops the machine, we try to communicate with pc but RS linx didnt detect the CPU. At last we erase and then download the program backup with our laptop successfully but the Panelview diddnt communicate and displays the message
" No active nodes found on network "
The communication setting is same i.e. node, channel, baud rate etc..... cpu is working fine panel view was communicating fine before this incident and we are getting the same result as well as after swaping the processors. We didnt try to communicate PV with our laptop because we dont have software.
The node is 2 at pv and is communicating via DH485.
Any help would be highly appreciated....
Regards