Hi!
I am using ifix first time and looking backup scada to learn things.
For Datalink I am using following tag reference and it is working fine.
Fix32.FIX.TEST.F_CV
But the Scada which is developed by someone else using syntax as below
@Node@PIT01_DATA.F_CV
How I can use it my syntax as above one.Is there is setting to do it or have to define node before using @[email protected] have tried
@[email protected]_CV
Not working in my case.Need Help
I am using ifix first time and looking backup scada to learn things.
For Datalink I am using following tag reference and it is working fine.
Fix32.FIX.TEST.F_CV
But the Scada which is developed by someone else using syntax as below
@Node@PIT01_DATA.F_CV
How I can use it my syntax as above one.Is there is setting to do it or have to define node before using @[email protected] have tried
@[email protected]_CV
Not working in my case.Need Help