Hello gentlemen,
I have a quite complex piece of equipment that I'm slowly getting to know and I have yet to find out what PLC or "Computer" runs the whole show. There are quite a few panels and in every panel there's a Wago 750-337 (Canopen) with I/O module attached to it.
But I do not see a CPU anywhere and I have practically zero knowledge of Wago. I researched the Wago part numbers I found and was able to identify the different I/Os and the only thing that resembles a CPU is Advantech Industrial Computer 610H which again I know nothing about.
Are the Wago I/Os connected to the Advantech and the later does all the processing/controlling?
Thanks
Kal
I have a quite complex piece of equipment that I'm slowly getting to know and I have yet to find out what PLC or "Computer" runs the whole show. There are quite a few panels and in every panel there's a Wago 750-337 (Canopen) with I/O module attached to it.
But I do not see a CPU anywhere and I have practically zero knowledge of Wago. I researched the Wago part numbers I found and was able to identify the different I/Os and the only thing that resembles a CPU is Advantech Industrial Computer 610H which again I know nothing about.
Are the Wago I/Os connected to the Advantech and the later does all the processing/controlling?
Thanks
Kal