Please excuse if this is a naive/silly question, but...
We have a panel with 208 VAC/3 phase coming in. I would like to use 24 VDC for all control, using a DC power supply, which will accept 85-264 VAC. I also have an instrument (flow meter), which requires VAC, 85-250VAC.
Is there anything wrong with powering these 2 devices (flow meter and DC power supply) with 2 legs of the 3 phase input? The naive point of view is that the voltage accross the 2 legs is 208VAC, so should work?
Thank you very much for all input.
We have a panel with 208 VAC/3 phase coming in. I would like to use 24 VDC for all control, using a DC power supply, which will accept 85-264 VAC. I also have an instrument (flow meter), which requires VAC, 85-250VAC.
Is there anything wrong with powering these 2 devices (flow meter and DC power supply) with 2 legs of the 3 phase input? The naive point of view is that the voltage accross the 2 legs is 208VAC, so should work?
Thank you very much for all input.