Anybody know how to take the date and time information from a Proface 4501TW using GP-Pro Ex to a 1769-L32E controller? I already know how to setup the SSV and I already created a tag for the destination point in the plc. I just can’t find where to go in the GP-Pro software to link the date and time from the HMI to the plc destination tag. Any help is appreciated. Thanks
Time/Date Proface Display
- Thread starter nik124
- Start date
Similar Topics
Hello Everyone,
I want to upgrade the firmware of Powerflex 40 from 5.001 to 6.002
can anyone tell me how can I do that?
Hello,
I'm hoping someone can help me with understanding how to set/change these data types. We recently swapped from Invertek to AB drives...
From the Red Lion website, after some customer enquiries in the last week or so...
Rev. March 25, 2024 [18:30]
Just thought it might help a...
How do you install update on Red Lion Crimson ver 3.1. Do I just need to run the exe file on the host server?
Has anyone found a way to convert/replace/update the firmware on old Parker TS80xx series HMIs (i.e. TS8010, TS8006, etc) to accept Crimson...