Hi All,
I am trying to get online with an Allen Bradly 1747 L514 SLC 5/04 PLC. It has a round DH+ programming port and an RS232 9 pin port which is talkking to a Proface HMI.
I tried using a 1761-cbl-pmc2 (PC to Micrologix) cable into the DH+ port on the plc and into a usb to serial converter on my PC.
Wont auto configure.
I also tried a rs232 with Pins 2 and 3 crossed with 5 connected again into the usb to serial. No luck.
Also tried a DB9 to DB9 into the usb to serial. still no luck.
The drivers for my usb to serial are working ok because ive used to recently to connect to other equipment.
Anyone have any suggestions?
I am running rs linx 2.57.00.14
Thank you in advance
I am trying to get online with an Allen Bradly 1747 L514 SLC 5/04 PLC. It has a round DH+ programming port and an RS232 9 pin port which is talkking to a Proface HMI.
I tried using a 1761-cbl-pmc2 (PC to Micrologix) cable into the DH+ port on the plc and into a usb to serial converter on my PC.
Wont auto configure.
I also tried a rs232 with Pins 2 and 3 crossed with 5 connected again into the usb to serial. No luck.
Also tried a DB9 to DB9 into the usb to serial. still no luck.
The drivers for my usb to serial are working ok because ive used to recently to connect to other equipment.
Anyone have any suggestions?
I am running rs linx 2.57.00.14
Thank you in advance