tano71
Member
Hello,
I starting to work with FactoryTalk View Studio.
I'm programing an PanelView Plus 700 (2711P-T7C4D9) without big problems,
One thinks that I can't do is to open a PDF file.
I try to use the activX control, so my quastions are the following:
PDF file I'm starting to work with FactoryTalk View Studio. I'm programing a PanelView Plus 700 (2711P-T7C4D9) without big problems,
One thinks that I can't do is to open a PDF file. I'm trying to use the activX control, so my questions are the following:
1. - I need to use ME Program launcher or Adobe PDF reader?
2. - How can I download the file PDF to the panel or I need to put this PDF file in a USB or CF Card.
3. - The panel is a Windows CE panel, then, it is possible to open Windows CE on the panel or not? I used the simulation of FactoryTalk View Studio and was possible to open a PDF file
For example I used the ME Program launcher activX control with the followinfg settings:
- Program Location ="C:\Programmi\Adobe\Reader 10.0\Reader\AcroRd32.exe"
- ProgramParameter = "C:\2012E395.pdf"
- FocusEnable = 0
- NewIntance: = 0
But I don't now how to do when iI will do the same think but using the Panel.
Tank a lot for the help
Best Regards
Alejandro
I starting to work with FactoryTalk View Studio.
I'm programing an PanelView Plus 700 (2711P-T7C4D9) without big problems,
One thinks that I can't do is to open a PDF file.
I try to use the activX control, so my quastions are the following:
PDF file I'm starting to work with FactoryTalk View Studio. I'm programing a PanelView Plus 700 (2711P-T7C4D9) without big problems,
One thinks that I can't do is to open a PDF file. I'm trying to use the activX control, so my questions are the following:
1. - I need to use ME Program launcher or Adobe PDF reader?
2. - How can I download the file PDF to the panel or I need to put this PDF file in a USB or CF Card.
3. - The panel is a Windows CE panel, then, it is possible to open Windows CE on the panel or not? I used the simulation of FactoryTalk View Studio and was possible to open a PDF file
For example I used the ME Program launcher activX control with the followinfg settings:
- Program Location ="C:\Programmi\Adobe\Reader 10.0\Reader\AcroRd32.exe"
- ProgramParameter = "C:\2012E395.pdf"
- FocusEnable = 0
- NewIntance: = 0
But I don't now how to do when iI will do the same think but using the Panel.
Tank a lot for the help
Best Regards
Alejandro