JiNCs
Member
I have two HMI’s; one an MP277 10” touch and the other an older MP270 10” key. I am trying to get the alarm log (history of alarms) to display using WinCC Flex 2008. No storage card so plugged in a flash drive.
Still no display. Under historical data for the MP277 I have ARCHIV-1 set as log file with path to USB device on HMI. Also have circular logging and Append to existing log. On the flash drive is a file ARCHIV_10.csv but it appears to be empty.
Seems the log is set up but I get no update. Ideas?
JiNCs
Still no display. Under historical data for the MP277 I have ARCHIV-1 set as log file with path to USB device on HMI. Also have circular logging and Append to existing log. On the flash drive is a file ARCHIV_10.csv but it appears to be empty.
Seems the log is set up but I get no update. Ideas?
JiNCs