RP
Guest
R
I am trying to use a Panel View 1000 to control a SLC 5/04 controller.I hooked up a RS 232 cable from the PC to the PV 1000, and a DH+ cable from the PV 1000 to the SLC 5/04. But I get an error when I try to transfer my program from PB32 to the PV 1000. It gives me "Error 208 Unable to write on remote device". Do you know why? I know it's a communication problem, I think the PV is not able to communicate with the SLC 5/04. Are my connections right and what about between the PC and the SLC 5/04 do I need to hook up anything?
Also I am not able to
Thanks again
Also I am not able to
Thanks again