Panel View plus firmware

idresu

Member
I
Join Date
Mar 2008
Location
Ca
Posts
3
Hi,

we were having a discussion on firmware and software for a panel View plus HMI. I guess i want to understand the functions of the firmware and the operating system and what exactly is getting upgraded when i flash a screen. Also, If I flash a panel view up to say a version 5.0, is this firmware all stored on the CF card in the logic module?

Thanks
 

Similar Topics

S
A-B Panel View Plus 7
We have boiler control system runs on A-B PLC. The interface is A-B Panel View Plus 7, mounted on the local control panel very near the boiler...
Replies
2
Views
44
Ken Roach
Ken Roach
H
Upgrade ram and cf card panel view plus
Am asking if we can upgrade sd ram and cf card of panel view plus ab by a normal sd ram and cf card but Allen Bradley to save cost because in ab...
Replies
9
Views
305
heshamtaha
H
A
Panel view plus 7
Good morning, I have a question, I would like to know if I can send an Excel file to an email from my panel view and see how it is possible to...
Replies
1
Views
178
robertmee
R
R
Panel View Plus 7 Performance & Windows 7
I want to run a factory talk view ME project in a Panel View Plus 7 Performance HMI. The project was developed in a 'Windows 7 Professional 64 bit...
Replies
5
Views
357
RRY
R
D
Panel View Plus 1000
I purchased a used PanelView Plus 1000 to learn get familiar with the software. Seems to be a pretty popular HMI. I can ping the HMI but I cannot...
Replies
6
Views
913
Ken Roach
Ken Roach
Back
Top Bottom