karofilakis
Member
Hi all
i am using STEP7 V5.5 SP2 HF4 & WINCC V7.0 SP3 on a 64bit PC with Win7 Ultimate
I have :
1. One UDT block in STEP7 project (Figure UDT)
2. One Data Block DB1 in STEP7 project (figure DB1)
3. In th OB1 block i assign the inputs I0.0 .....I3.7 to the DB (figure OB1)
4. A simple project in Wincc with this screen (figure Sreen1)
5. One tag (figure Tag)
6. In the properties of the input1 box in the screen1 i make a dynamic action (figure Dynamic action)
I run PLCSIM for testing all above (figure PLCSIM)
As u can see i have all inputs set to 1, BUT NOTHING HAPPEND IN THE INPUT BOX
Why?
I Trigger the tag connection by the output value of 30, and it is not show. That mean the connection exist, but the output value is not turn to 1 as i make for set the bit 0.0
What am i doing wrong ?
Please help
Thanks in advance
i am using STEP7 V5.5 SP2 HF4 & WINCC V7.0 SP3 on a 64bit PC with Win7 Ultimate
I have :
1. One UDT block in STEP7 project (Figure UDT)
2. One Data Block DB1 in STEP7 project (figure DB1)
3. In th OB1 block i assign the inputs I0.0 .....I3.7 to the DB (figure OB1)
4. A simple project in Wincc with this screen (figure Sreen1)
5. One tag (figure Tag)
6. In the properties of the input1 box in the screen1 i make a dynamic action (figure Dynamic action)
I run PLCSIM for testing all above (figure PLCSIM)
As u can see i have all inputs set to 1, BUT NOTHING HAPPEND IN THE INPUT BOX
Why?
I Trigger the tag connection by the output value of 30, and it is not show. That mean the connection exist, but the output value is not turn to 1 as i make for set the bit 0.0
What am i doing wrong ?
Please help
Thanks in advance