Webhead
Member
Can someone tell me the latest version of Proficy Machine Edition? I had a contractor use 8.6 and we have 8.0 so I am unable to load his project let alone download anything if I need to. Thanks in advance.
GE Proficy ME latest version?
- Thread starter Webhead
- Start date
NetNathan
Lifetime Supporting Member
8.6 is latest version.
...and PME 9.00 is due out any day now...
If you have an active GlobalCare support there is no cost to upgrade.
http://www.geautomation.com/search/gss/globalcare
Last edited:
Similar Topics
Has anyone migrated Proficy Historian data to a new server? I followed the guide to move all the data over, but when I run the utility, it stops...
I'm getting frustrated creating arrays of variables in Machine edition.
I need to make 2 variable arrays that are 102x2 in size, with varying...
Hi
I am wondering if the RXI-042 PLC model (below PN) is programable via Proficy Machine Endition, if so, what is the firmware version needed for...
Greetings,
I am working on a project and I would like to scale %AI to -10.0 to 10.0 VDC. The module Input data is stored as a 16 bit Integer and...
I am trying to download a program with usb to serial cable in rx3i IC695CPE305 while logic and configuration is equal but when i start downloading...