I've never programmed analog control in ladder. Here is what I'm trying to do.
Flow 1 Analog input 1 - (4-20ma)0-50 lbs sec, this input is monitor only, a valve is turned on and flow takes place via gravity.
Flow 2 Analog input 2 - (4-20ma)0-10 lbs sec, this is an injection circuit measuring 0-10 lbs sec and we want to maintain a ration of 2% of Flow 1
Flow 2 Pump VFD Analog output 1 - (0-10vdc) I need to control this pump to a mix ratio of 2% of Flow 1
I have the PID control Flow 2 analog input 2 and the pump VFD analog output 1 set up so I enter a flow.
How would I program ladder so Flow 2 follows Flow 1 at 2% or 100:2 ration?
Flow 1 Analog input 1 - (4-20ma)0-50 lbs sec, this input is monitor only, a valve is turned on and flow takes place via gravity.
Flow 2 Analog input 2 - (4-20ma)0-10 lbs sec, this is an injection circuit measuring 0-10 lbs sec and we want to maintain a ration of 2% of Flow 1
Flow 2 Pump VFD Analog output 1 - (0-10vdc) I need to control this pump to a mix ratio of 2% of Flow 1
I have the PID control Flow 2 analog input 2 and the pump VFD analog output 1 set up so I enter a flow.
How would I program ladder so Flow 2 follows Flow 1 at 2% or 100:2 ration?