Philadelphia Frank
Member
Can anyone point me to an example of a CompactLogix - Panelview program. This is my first attempt programming Panelview and/or CompactLogix. This whole "Tag Name" concept is new to me and I'm getting hit with a double whammy.
I was able to copy the sample program in the Panelview QuickStart manual using my Panelview 900 (2711 T9A5) and a SLC 5/04. I just typed exactly what I read; can't say I learned much.
I can't find a similar tutorial for the Panelview and the CompactLogix. I would be happy with a simple basic example. Something like 0ne button on the Panelview. Press the button and see a bit change in the CompactLogix. When a bit changes in CompactLogix see a change on the Panelview.
As I mentioned earlier I have a 2711-T9A5 (RS232-DH485) and a CompactLogix 5330. I'm using RSLogix 5000 v.11, although I have access to different versions.
Has anyone used a Panelview and Compactlogix together? Have you seen an example of the two in a manual? Can it even be done?
Thank you for any help you can offer;
Frank
I was able to copy the sample program in the Panelview QuickStart manual using my Panelview 900 (2711 T9A5) and a SLC 5/04. I just typed exactly what I read; can't say I learned much.
I can't find a similar tutorial for the Panelview and the CompactLogix. I would be happy with a simple basic example. Something like 0ne button on the Panelview. Press the button and see a bit change in the CompactLogix. When a bit changes in CompactLogix see a change on the Panelview.
As I mentioned earlier I have a 2711-T9A5 (RS232-DH485) and a CompactLogix 5330. I'm using RSLogix 5000 v.11, although I have access to different versions.
Has anyone used a Panelview and Compactlogix together? Have you seen an example of the two in a manual? Can it even be done?
Thank you for any help you can offer;
Frank