Hi Guys, Hoping someone can help me out.
I am trying to read some registers from a Modbus slave. In the MLocation attachment, everything is working fine. When I try to put the read value into a DB I get an 818C error. What is the difference between these two other than one being a M location defined as a real and the other being an array of reals inside a Data Block.
Thanks You
I am trying to read some registers from a Modbus slave. In the MLocation attachment, everything is working fine. When I try to put the read value into a DB I get an 818C error. What is the difference between these two other than one being a M location defined as a real and the other being an array of reals inside a Data Block.
Thanks You