Siemens S7-300 Master and S5 115U slave

Guest

Guest
G
Hello guys,I am communicating a S7-300 PLC as a master with one S5 115U(IM 308C) as slave using Profibus DP.I would like to be able to read all four analog inputs cards (16 inputs each) at the central rack and other four cards at the expansion rack in the S5 PLC from the master S7. So far I have had success reading only three AI cards.Is there some body out there that could help me on this?.

Thanks a lot

Eduardo
 

Similar Topics

N
S7-300 Profibus Master and non-Siemens device as Profibus Slave
Hello Guys, I have s7-315-2 PN/DP with integrated DP. I have no CP module. PLC should be DP master. ON other side there is basler device DECS250...
Replies
6
Views
3,480
boneless
boneless
P
Siemens S7-300 & Micromaster 440
I am trying, for the first time, to write values to the control word of a Micromaster 440 using an S7-300 PLC. I barely know what I'm doing, and...
Replies
4
Views
2,572
KalleOlsen
K
A
siemens s7 300 and p and f asi master
how can i obtain diagnostic data out of p an f asi master can i use read rec as when using 343-2
Replies
0
Views
5,251
alan s
A
ceilingwalker
ESA HMI and Siemens S7-300 question
Hello all. I have an ESA HMI that is connected to a Simatic S7-300 (CPU312). I have uploaded the program from the PLC which is written with Step7...
Replies
6
Views
1,444
ceilingwalker
ceilingwalker
M
Siemens S7 300 PLC replacement issue
Hello. There is a problem with Siemens S7 300. We got a replacement PLC but it does not run the program from the MMC. The new PLC is dated 2011...
Replies
3
Views
689
Rob...
R
Back
Top Bottom