cares_nayk
Member
Hi All,
We Have A Tsx P57 202 Modicon Premium Connected To A Pc Which Runs Intellution Fix 6.1. The Tsx P57 Shows A Flashing 'err' Illumination. On Checking I Found The 3v Battery On A Attached Tsx Scp 111 Ram On The Pcmcia Slot Discharged And Replaced It. However, The Error Continues. The Fix Reports Digital Communication Failure And The Pcmcia Slot ( Tsx Scp 111) Also Indicates A Flashing Err Light And The Com Light Does Not Glow.
I Suspect That The Sram Had Some Configuartion Data Similar To The Bios Of A Pc And Has Been Lost And Needs To Be Reset Post Replacement Of Battery. Could This Happen ? How Do I Figure Out The Original Configuration ?
We Were Operating Through The Fix Program And Have No Prior Experience Of Plcs - If Anyone Could Help Us Out With This Would Be Nice. Thanks All.
We Have A Tsx P57 202 Modicon Premium Connected To A Pc Which Runs Intellution Fix 6.1. The Tsx P57 Shows A Flashing 'err' Illumination. On Checking I Found The 3v Battery On A Attached Tsx Scp 111 Ram On The Pcmcia Slot Discharged And Replaced It. However, The Error Continues. The Fix Reports Digital Communication Failure And The Pcmcia Slot ( Tsx Scp 111) Also Indicates A Flashing Err Light And The Com Light Does Not Glow.
I Suspect That The Sram Had Some Configuartion Data Similar To The Bios Of A Pc And Has Been Lost And Needs To Be Reset Post Replacement Of Battery. Could This Happen ? How Do I Figure Out The Original Configuration ?
We Were Operating Through The Fix Program And Have No Prior Experience Of Plcs - If Anyone Could Help Us Out With This Would Be Nice. Thanks All.